大量注射成型制造商

大量注射成型从零件设计到最终交付

2K Injection mold, known as two color Injection mold, two shot mold, twin-shot mold, dual-shot mold, double color mold, double shot mold, 2K mold and 2K tooling, Double Injection mold, bi-injection mold, Multi-material or multi-component injection mold.

Stebro Mold is a professional two shot injection mold supplier for 2K Injection Mold manufacturing with short lead times in China. We can help you make the double injection mold from the parts design analysis, tooling design and tooling manufacturing. The way we stay competitive is price and lead time. There are lots of mold manufacturer that make high-quality molds. We want to make a high-quality mold fast with affordable price to set us apart from the test of the industry.

高Volume Plastic Design

We help you to optimize the plastic product design & development for Injection Molded Products to saving you time and cost in Plastic Design, Mold Manufacturing, Plastic Injection Molding & Part Assembly.

高Volume Injection Mold Design

We provide plastic rapid prototyping services and complete product development. These services including CNC machining, SLA plastic prototype , SLS plastic prototype, Vacuum Casting and Low Volume Injection Molding.

高Volume Mold Manufacturing

我们是中国专业的塑料模具制造商和定制注塑制造商。BOB王者荣耀我们专门针对室外动力设备，汽车，医疗，电子和其他类型的塑料产品制造塑料注射模具。

高量注射成型

A Full Services Custom Plastic Injection Molding Company providing Complete Product Development to Mass Part Production in China. Low & High Volume Injection Molding, Insert Molding, Over Molding & Vertical Injection Molding

高容量设计部分

壁厚之间的过渡应逐渐减少流动问题，例如后填充和气体陷阱。
应避免深，无法通风的盲袋或肋骨。
Long draws should have a 3-5° draft per side to aid component ejection.
The TPE thickness should be less than or equal to the thickness of the substrate to prevent warpage; this is especially critical for long, flat geometries.
Uniform wall thickness in product is preferred to obtain the best molding cycle time and avoid shrink mark. Wall thicknesses ranging from 1.5 mm-3 mm will ensure good bonding in most overmolding applications. If the part requires the use of thick TPE sections, they should be cored out to minimize shrinkage problems, reduce the part weight and lower cycle time.

高Volume Injection Mold Design

We insist mold construction design, steel quality and precise manufacturing is the key to achieve molds with excellent performance. Our mold design principle is the mold must be durable, high efficiency and easy to do the maintance and manufacturing.

Shrinkage factor for both materials.
塑料成分壁厚，均匀的壁厚厚度优先。
Number of cavities in the mold
Plastic material feeding systems. Runner and Gate
Core and cavity cooling system
Component ejection system.
To avoiding burn mark, air vent is necessary.
注射成型Type

高Volume Mold Manufacturing

To speed up the mold manufacturing process without sacrificing quality, you need the right technology. We use UG to design and manufacture molds. The 2K Mould manufacturing was done toally according to the 3D mold design. For manufacturing the 2K mold, we use different manufacturing machines such as Mikron CNC, AgieCharmiles EDM, Sodick Slow Wire Cut machine, Grinding Machine and Gun Drill Machine. After machining all the components, we have to measure the key size on the CMM machine. It is very important to avoid flash at the parting surface.

Production molding capabilities and services include:

Fully-automated injection Molding
完全自动化的插入成型
Focus on medium to high-volume, tight tolerance, custom plastic parts
金属到塑料转换的专业知识
Light assembly capabilities
高级计量设备以支持所有PPAP要求
Ultrasonic welding support

Vertical Integration

Single-source, vertically integrated, Stebro Mold makes the transition to injection molding with new tooling easier and more flexible. We can easily handle your T-0, T-1 sample and short run production before the tool’s ships to its` home location or as many parts as needed to launch your program or fill your future production. Learn more about our in-house 2K Injection Molding.